Zanussi ZOD370 User Manual page 19

2x 3,5x25
Electrical installation
Warning! Only a qualified and competent person
must do the electrical installation.
The manufacturer is not responsible if you do not
follow safety precautions from chapter "Safety".
This appliance is supplied without a main plug and a main
cable.
Applicable cable types : H07 RN-F, H05 RN-F, H05 RRF,
H05 VV-F, H05 V2V2-F (T90), H05 BB-F
Electrical Installation
• Enquiries regarding the installation of the cooker point,
if required, should be made to your Regional Electricity
Company to ensure compliance with their regulations.
• The appliance socket switch should be outside the cab-
inet but within 2m of the appliance to make it accessi-
ble to switch off the appliance in case of an emergency.
• To protect the hands, wear gloves when lifting the oven
into its housing.
Important! HOUSE CIRCUIT
Earth leakage and continuity tests must be carried out
before the appliance is connected to the mains supply and
re-checked after fitting.
GETTING THINGS READY CHOICE OF ELECTRICAL
CONNECTION
There are three possible ways to connect your appliance.
In each case the appliance should be operated using at
least 6mm² twin core and earth PVC insulated multicore
cable. Please choose from the most appropriate after read-
ing the different methods :
a) By connecting to a cooker point (having a double
pole isolating switch with at least 3mm contact sepa-
ration in all poles and neutral) and protected with a
fuse or miniature circuit breaker at your mains fuse
box.
b) By connecting the appliance together with a hob di-
rectly to a cooker point(s). Having a double pole iso-
lating switch with at least 3mm contact separation in
all poles and neutral.
c) If you wish to connect an oven and a hob to a cooker
point you can by connecting the oven and hob sepa-
rately to the cooker point. Oven and hob units should
be separately connected to a cooker point. (See Pic-
ture)
3
1
2
19