Cleaning The Oven Door - Electrolux EI24EW35LS User Manual

WARNING!
Deactivate the appliance before
you fold down the heating ele-
ment. Make sure that the appli-
ance is cold. There is a risk of
burns.
Folding down the heating element
1.
Remove the shelf supports.

9.4 Cleaning the oven door

Removing the door and the glass panels
You can remove the oven door and the
internal glass panels to clean it. The num-
ber of glass panels is different for different
models.
WARNING!
Be careful when you remove the
door from the appliance. The door
is heavy.
A
2. Hold the heating element with two
hands at the front.
3. Pull it forwards against the spring
pressure and out along the supports
on the two sides.
4. The heating element folds down.
You can clean the oven ceiling.
Installing the heating element
1. Install the heating element in the op-
posite sequence.
2. Install the shelf supports.
1. Open the door fully.
2. Fully press the clamping levers (A) on
the two door hinges.
3. Close the oven door to the first open-
ing position (approximately 70° angle).
A
4. Hold the door with one hand on each
side and pull it away from the appli-
ance at an up angle.
5. Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
ENGLISH
Install the heating element cor-
rectly above the supports on the
inner walls of the appliance.
21