ATEN Master View CS-1762 User Manual page 30

CS-1762 / CS-1764 User Manual
3. After you have made your device selection(s), Click Next to perform the upgrade.
If you enabled Check Firmware Version, the Utility compares the device's firmware
level with that of the upgrade files. If it finds that the device's version is higher than
the upgrade version, it brings up a dialog box informing you of the situation and
gives you the option to Continue or Cancel.
If you didn't enable Check Firmware Version, the Utility installs the upgrade files
without checking whether they are a higher level, or not.
As the Upgrade proceeds status messages appear in the Status Messages panel, and
the progress toward completion is shown on the Progress bar.
24
2004-06-04