Download Print this page

ADDER Link DV100 User Manual

Receiver unit; transmitter unit

Advertisement

Quick Links

Warranty
Adder Technology Ltd warrants that this product shall be free from defects in workmanship and
materials for a period of two years from the date of original purchase. If the product should fail to
operate correctly in normal use during the warranty period, Adder will replace or repair it free of
charge. No liability can be accepted for damage due to misuse or circumstances outside Adder's
control. Also, Adder will not be responsible for any loss, damage or injury arising directly or indi-
rectly from the use of this product. Adder's total liability under the terms of this warranty shall in
all circumstances be limited to the replacement value of this product.

Regulatory information

EMC directive 2004/108/IEC
This equipment has been tested and found to comply with the limits for a class A computing
device in accordance with the specifications in the European standard EN55022. These limits are
designed to provide reasonable protection against harmful interference. This equipment gener-
ates, uses and can radiate radio frequency energy and if not installed and used in accordance
with the instructions may cause harmful interference to radio or television reception. However,
there is no guarantee that harmful interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be determined by
turning the equipment on and off, the user is encouraged to correct the interference with one
or more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase
the separation between the equipment and the receiver. (c) Connect the equipment to an outlet
on a circuit different from that to which the receiver is connected. (d) Consult the supplier or an
experienced radio/TV technician for help.
FCC compliance statement (United States)
This equipment generates, uses and can radiate radio frequency energy and if not installed
and used properly, that is, in strict accordance with the manufacturer's instructions, may cause
interference to radio communications. It has been tested and found to comply with the limits for
a Class A computing device in accordance with the specifications in Subpart J of part 15 of FCC
rules, which are designed to provide reasonable protection against such interference when the
equipment is operated in a commercial environment. Operation of this equipment in a residential
area may cause interference, in which case the user at his own expense will be required to take
whatever measures may be necessary to correct the interference. Changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate the equipment.

Safety information

• For use in dry, oil free indoor environments.
• Ensure that the twisted pair interconnect
cable is installed in compliance with all ap-
plicable wiring regulations.
Web:
www.adder.com
Contact:
www.adder.com/contact-details
Support:
forum.adder.com
© 2013 Adder Technology Limited • All trademarks are acknowledged.
Part No. MAN-QS-ALDV100-ADDER • Release 1.0d
• Do not connect the interconnect cable to
any other equipment, particularly network
or telecommunications equipment.
• Do not attempt to service the units yourself.
AdderLink DV100

User Guide

Your AdderLink DV100 package
The AdderLink DV100 allows you to extend HDMI digital video over a maximum of 50 meters of
twisted pair cable with the minimum of infrastructure and fuss. It is simply powered via USB from
the transmitter end, so that no additional power supply is required at the receiver, simultaneously
saving time and space as well as making installation very straightforward.
In addition to this brief guide, your package should contain the following:
Supplied items
ALDV100P package includes: 1 transmitter unit and 1 receiver unit
Receiver unit
What you may additionally need
This power kit is only required if the host
computer or other device with a USB
port cannot provide sufficient power.
Transmitter unit
PSU-LPV-KIT
External power
adapter and USB
adapter cable.

Advertisement

loading

Summary of Contents for ADDER Link DV100

  • Page 1: User Guide

    Also, Adder will not be responsible for any loss, damage or injury arising directly or indi- rectly from the use of this product. Adder’s total liability under the terms of this warranty shall in all circumstances be limited to the replacement value of this product.
  • Page 2: Power Control

    Yellow LED: Flashes when the receiver unit is being checked. On when the receiver unit has For best results, Adder recommends S/FTP CAT7 cable such as Adder part number VSCAT7-50. been verified and power applied to it. Patch panels or cable couplers should only be used close to the transmitter unit, connected by CAT7 patch cables of no more than 2m in length.

This manual is also suitable for:

Adderlink dv100