Table of Contents
Advertisement
9
INSTALLATION MODE
Starting up the Installation Mode
ENTER
ENTER
EXIT
Input Slots
Highlight Input Slots by pushing the control disc up or down and press
ENTER.
The internal system will scan the input slots and displays the result
in the Input Slots menu.
Component Video - 3LSOY : component
video with 3 level sync on Y.
RGB analog with
tri-level sync
RGB3L-SS : RGB with separate Tri level sync
RGB3L-SOG : RGB with Tri level sync on
If a RCVDS (switched on) or VS05 is connected to the projector, it will
be also indicated on the menu by adding +800 peripheral . If no 800
peripheral indication is made on the menu, there are still two possi-
bilities :
- no RCVDS or VS05 connected or
- RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots
are not accessible with the control disc to toggle their function.
5975957 BARCOGRAPHICS 9200 221297
green
Installation Mode
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
INTERNAL PATTERNS
Select with
or
then <ENTER>
<EXIT> to return.
INPUT SLOTS
Select with
or
Slot Module Type (config)
then <ENTER>
<EXIT> to return.
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
9-1
Advertisement
Table of Contents
