TCP CONNeCTOR ReMOvAL
Lift up the lock as shown by arrows. (The Lock can be easily broken. It needs to be handled
carefully.) Pull TCP apart as shown by the arrows. The TCP Film can be easily damaged,
handle with care.
P232 & P331 CONNeCTOR ReMOvAL
The X-Drive boards can be removed after removing the back cover, the main board, and
the heat sink covering the TCPs is removed (15 screws).
Peel the tape off
the connectors and
gently pry the locking
mechanism upward.
Gently pry the locking mechanism upward on all TCP
connectors P201-206 or P301-306.
Carefully lift the TCP ribbon up and off the cushion and
out of the way.
DISASSeMBLy
15
PDP Training - Fall 2008
4
2
P
G
2
0