External Control Device Setup; Rs-232C Setup; Type Of Connector; D-Sub 9-Pin Male - LG 42PN450P Owner's Manual

EXTERNAL CONTROL dEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/
V control system) to control the product's functions
externally.
Connect the serial port of the control device to the RS-
232C jack on the product back panel.
RGB IN
(PC)
AUDIO IN
(PC)
OPTICAL
AV IN
AUDIO DIGITAL
VIDEO L/MONO R R R
AUDIO OUT
Y P P L R
B R
VIDEO AUDIO
IN 2
NOTE
RS-232C on this unit is intended to be used
y y
with third party RS-232C control hardware and
software. The instructions below are provided
to help with programming software or to test
functionality using telenet software. RS-232C
connection cables are not supplied with the
product.
Type of connector;
D-Sub 9-Pin Male
ANTENNA/
CABLE IN
EXTERNAL CONTROL DEVICE SETUP
1
6
RS-232C IN
(CONTROL & SERVICE)
No. Pin name
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
33
5
9