Installing The Memory; Removing The Chassis Intrusion Switch - Dell OptiPlex 3010 Mini-Tower Owner's Manual

4. Lift the memory modules out of the connectors on the system board.
Related Links

Installing the Memory

Installing the Memory
1. Insert the memory modules into the connectors on the system board. Install the memory module in the order of A1 >
B1 > A2 > B2.
2. Press down on the memory modules until the retention clips spring back to secure them in place.
3. Install the cover.
4. Follow the procedures in
Related Links
Removing the Memory

Removing The Chassis Intrusion Switch

1. Follow the procedures in
2. Remove the cover.
3. Disconnect the intrusion switch-cable from system board.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
15