Dell OptiPlex 3010 Mini-Tower Owner's Manual page 36

Performance
Multi Core Support
Intel SpeedStep
C States Control
Hyper-Thread Control
Power Management
AC Recovery
Auto On Time
Deep Sleep Control
Fan Control Override
Wake on LAN
36
This field specifies whether the process will have one or all cores enabled. This option
is enabled by default.
Allows you to enable or disable the Intel SpeedStep mode of the processor. This option
is disabled by default.
Allows you to enable or disable additional processor sleep states. This option is
disabled by default.
Allows you to enable or disable the Hyper-Threading Technology. This option is
enabled by default.
Determines how the system responds when AC power is re-applied after a power loss.
You can set the AC Recovery to:
• Power Off
• Power On
• Last State
This option is Power Off by default.
Sets time to automatically turn on the computer. Time is kept in standard 12-hour
format (hour:minutes:seconds). Change the startup time by typing the values in the time
and AM/PM fields.
NOTE: This feature does not work if you turn off your computer using the switch on
a power strip or surge protector or if Auto Power is set to disabled.
Allows you to define the controls when Deep Sleep is enabled.
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5
This option is Disabled by default.
Controls the speed of the system fan. This option is disabled by default.
NOTE: When enabled, the fan runs at full speed.
This option allows the computer to power up from the off state when triggered by a
special LAN signal. This feature only works when the computer is connected to AC
power supply.
• Disabled - Does not allow the system to power on by special LAN signals when
it receives a wake-up signal from the LAN or wireless LAN.
• LAN Only - Allows the system to be powered on by special LAN signals.
This option is Disabled by default.