Installing The Hard Drive; Removing The Memory - Dell OptiPlex 3010 Mini-Tower Owner's Manual

5. Flex the hard-drive bracket and then remove the hard drive from the bracket.
6. Repeat the above steps for the second hard drive, if available.
Related Links

Installing the Hard Drive

Installing The Hard Drive
1. Flex the hard-drive bracket and then insert the hard drive into the bracket.
2. Press both blue securing-bracket tabs inward and slide the hard-drive bracket into the bay in the chassis.
3. Connect the data cable and power cable to the back of the hard drive.
4. Install the cover.
5. Follow the procedures in
Related Links
Removing the Hard Drive

Removing the Memory

1. Follow the procedures in
2. Remove the cover.
3. Release the memory-retention clips on each side of the memory modules.
14
After Working Inside Your
Before Working Inside Your
Computer.
Computer.