Flexiblelom Option - HP ProLiant DL380p Gen8 User Manual

Replace the safety cover.
7.
Insert the power supply into the power supply bay until it clicks into place.
8.
Route the power cord. Use best practices when routing power cords and other cables. A cable
9.
management arm is available to help with routing. To obtain a cable management arm, contact an HP
authorized reseller.
Make sure the 48V DC power source is off or the PDU breaker is in the off position, and then connect
10.
the power cord to the 48V DC power source or PDU.
Turn on the 48V power source or switch the PDU breaker to the on position to supply 48V to the power
11.
supply.
Be sure that the green power supply LED is on.
12.

FlexibleLOM option

Hardware options installation 70