HP Photosmart R707 User Manual page 148

Message
Unable to
communicate with
printer
Unsupported
printer
Photo tray is
engaged.
Disengage photo
tray or select
smaller paper
size.
Printer top cover
is open
Incorrect or
missing print
cartridge
148
Possible cause
There is no
connection
between the
camera and
printer.
The printer is an
unsupported
device.
The selected
paper size cannot
be used with the
printer photo
tray.
The printer is
open.
The printer
cartridge is the
incorrect model
or is missing.
HP Photosmart R707 User's Manual
Solution
Check that the printer is
!
turned on.
Make sure the cable is
!
connected between the
printer and the camera
or the optional HP
Photosmart R-series
dock. If that does not
work, turn off the camera
and disconnect it. Turn
the printer off and then
on again. Re-connect the
camera and turn it on.
Connect the camera to a
supported printer, such as
an HP Photosmart or
PictBridge-compatible
printer. Or connect the
camera to a computer and
print from there instead.
Disengage the printer
photo tray, or change the
paper size.
Close the top cover of the
printer.
Install a new printer
cartridge, turn the printer
off, then turn it back on.