HP R-series User Manual page 19

Problem Possible cause
The camera There is a
is not functional
recognized problem with
by the the dock.
computer
when it is in
the dock.
(continued)
Cannot The TV is not
display set to the
images on correct input
the TV. mode.
Audio and
video cables
are switched.
Incorrect video
signal format
(NTSC or PAL).
Solution
Run the dock functionality test by
unplugging the power cord from
the dock, then holding down the
two buttons on the front of the dock
while you plug the power cord
back into the dock, and continue
holding the buttons down. If the
dock lights come on in 5 seconds
(blinking or solid), then the dock is
fully functional.
Check your TV user's manual to set
the TV to accept
mode.
Try switching the audio and video
cables on the back of the TV, DVD
player, or VCR.
Change the TV configuration
setting in your camera (see your
camera User's Manual).
video or input
19