Face Detection And Tracking - Canon LEGRIA HF R56 Instruction Manual

2 Press Y.
The camcorder records for a few seconds (the blue frame serves as a
visual progress bar) and then automatically returns to recording
standby mode.
NOTES
• You can change the length of the video snapshot scene with the 1
p >
[Video Snapshot Length] setting.
• Any of the following actions will deactivate video snapshot.
- Turning off the camcorder.
- Pressing ].
- Changing the movie format (AVCHD/MP4), video quality or frame rate.

Face Detection and Tracking

The camcorder automatically detects people's faces and uses this
information to select the optimal settings for beautiful videos and pho-
tos. You can use tracking to tell the camcorder to track and optimize
settings for a different person. You can also use tracking to always
keep in focus other moving subjects, such as pets or moving vehicles.
Operating modes:
*
*
* Face detection and tracking are always activated in
POINTS TO CHECK
• When the shooting mode is set to
other than [J Night Scene], [N Low Light] or [P Fireworks].
• By default, face detection and tracking are activated so you can skip
step 1 in the following procedure. If the function was turned off, perform
the following procedure starting from step 1.
1 Activate face detection and tracking.
0
>
[Face Detection & Tracking]
SCN
[1 Other Settings]
, select a Special Scene mode
SCN
> p >
[i On }]
>
Advanced Shooting
and modes.
>
[X]
>
69