Canon LEGRIA HF R56 Instruction Manual page 130

0
>
[— Wi-Fi] (video playback mode, from any index screen)
>
[w Check/Edit Settings]
[Access Point Connection Settings]
2 Touch the desired setup method.
Depending on the setup method chosen, the procedure will be
different. Read the descriptions below and continue with the procedure
described in the relevant page.
Options
[WPS: Button]*
wireless router and then touch the camcorder's screen. This is
the easiest connection method if you are using a WPS-compati-
ble router. Continue the procedure as described in
tected Setup (WPS)
[WPS: PIN Code]*
using your Web browser. The camcorder will give you a PIN
code, which you will enter into the browser. You will need a WPS-
compatible router and a computer or other device connected to
it. Continue the procedure as described in
(WPS)
(A 131).
[Search for Access Points]
instructions, you select the desired access point from a list and
then enter your password. Continue the procedure as described
Searching for Access Points
in
[Manual Setup]
word and other network settings. This method is recommended
only for advanced users of Wi-Fi networks. Continue the proce-
dure as described in
* WPS, which stands for Wi-Fi Protected Setup, is a standard that makes connect-
ing to a wireless router easier.
130
Wi-Fi Functions
[ Remote Control+Streaming] (recording mode) or
Simply press and hold the WPS button on your
(A 131).
Access the access point's configuration screen
You manually enter the access point's name, pass-
Manual Setup
>
[OK]
Following the camcorder's onscreen
(A 132).
(A 132).
>
>
[Not configured]
Wi-Fi Pro-
Wi-Fi Protected Setup