Canon LEGRIA HF R56 Instruction Manual page 26

8 Touch [·] or [¸] to select the movie format and then touch
[æ].
• C After you select the movie format, the [v Rec Media for
Movies] screen will appear, where you can select the memory to
which you want to record movies.
• A Skip to step 11.
9 Touch [&] (built-in memory) or [8] (memory card) and then
touch [æ].
• When selecting the memory, you can check the available recording
time based on the video quality setting.
• After you select the memory to which you want to record movies, the
[{ Rec Media for Photos] screen will appear.
10 Touch [&] (built-in memory) or [8] (memory card) and then
touch [æ].
When selecting the memory, you can check the number of photos that
can be recorded, based on a photo size of 1920x1080.
11 Touch [OK].
• The basic setup is complete. The settings you selected will appear
briefly and then the camcorder will be ready to record.
• After completing the basic setup, you can close the LCD panel or
press [ to turn off the camcorder.
NOTES
• Some buttons, such as [ZOOM] or [PHOTO], will appear in English
regardless of the language selected.
• You can change the language later on with the 1
guage H] setting. You can adjust the date and time later on with the
1
> q
later on with the 3
select the memory for movies and photos later on with the 3
[Recording Media]
tos] settings.
• When you do not use the camcorder for about 3 months, the built-in
rechargeable lithium battery may discharge completely and the date
and time setting may be lost. In such case, recharge the built-in lithium
battery (A 175). The next time you turn on the camcorder, you will
have to configure the initial settings again.
26
Preparations
>
[Date/Time] setting. You can change the movie format
> [Movie Format] setting. C You can
>
[Rec Media for Movies] and [Rec Media for Pho-
> q >
[Lan-
>