Canon LEGRIA HF R56 Instruction Manual page 171

List of Messages for Web Services
Check network settings
- The network settings in the camcorder are not correctly configured. Check the connection
point, SSID and other network settings.
Connect to a computer and use the dedicated software to set up This service may not be
available in your region
- To use Web services, set in the camcorder the settings saved on CANON iMAGE GATEWAY.
Install ImageBrowser EX and CameraWindow in your computer and configure the settings
using CANON iMAGE GATEWAY.
Connect to a computer and use the dedicated software to set again
- An error occurred when connecting to the CANON iMAGE GATEWAY server. Check the settings
saved on CANON iMAGE GATEWAY and set them again in the camcorder.
Insufficient space on server
- You have exceeded the amount of data you can save on the CANON iMAGE GATEWAY server.
Delete some data to free some space.
Movie must be less than X min.
- You attempted to send a movie whose length exceeds the maximum length allowed by the
Web service (the maximum length differs according to the Web service). Shorten the movie
and try sending it again.
Server busy Try again later
- The CANON iMAGE GATEWAY server is busy due to a high number of users trying to connect to
the server. End the Wi-Fi connection and try again later.
This image cannot be sent
- You attempted to send a type of recording or a file with a size that is not supported by the
selected Web service. Check the recording before sending.
Try again
- An error occurred when connecting to the CANON iMAGE GATEWAY server or the server is
temporarily down. End the Wi-Fi connection and try again.
Additional Information
171