Sanyo Power Vision SCP-8400 User Manual page 203

Making a Sprint PCS Ready Link Call
(One-to-One Call)
You can place a one-to-one Sprint PCS Ready Link call by
entering a Sprint PCS Ready Link number or by selecting a
contact from the Sprint PCS Ready Link List.
To place a Sprint PCS Ready Link call by selecting a contact:
1.
Press
2.
Press Go to (left softkey), select the list from which you
want to place a call (Company List, Personal List,
Outgoing, Incoming, or Missed), and press
Tip:
You can also select Enter R-Link# from the Go to option to enter a
Sprint PCS Ready Link number directly. (See page 190 for details.)
3.
Scroll to the contact you want to call, and press and
hold
"R-Link calling..."and "Connecting..."followed by
"You have floor." You can now begin speaking.)
– or –
Scroll to the contact you want to call and press and
release
described above, but "Floor is open."will appear on the
screen and either you or your contact may press and
hold
Note:
During a Sprint PCS Ready Link call, the "floor"is the right to speak.
When you see "Floor is open.,"the first person to press the Ready Link/
Recorder button (
person who has the floor can speak. The phone beeps if you press
another contact has the floor.
.
to place the call and get the floor. (You will see
to place the call. (The call will connect as
to take the floor and speak.)
) can speak (while holding the button). Only the
Section 2K: Using Sprint PCS Ready Link
.
when
187