Setting Headset Mode; Useful Functions - Sanyo Power Vision SCP-8400 User Manual

Setting Headset Mode

This feature allows you hands-free phone use. Set the headset
mode to Voice Call or Ready Link call and press the Turbo
Button (the operation button) on the headset to activate

useful functions.

To connect the headset:
Simply plug the headset into your phone's headset jack.
To set headset mode:
1.
Select
2.
Select Turbo Button.
3.
Select an option and press
Voice Calls: Press the Turbo Button to activate Voice
Dial. Press twice to redial the last call. Press and hold
to record a voice memo.
Ready Link: Press and hold the Turbo Button to redial
the last Sprint PCS Ready Link call.
Off: Select Off if you do not wish to assign a Turbo
Button setting or if your headset does not have a
Turbo Button.
To set the sound mode:
1.
Select
2.
Select Earpiece.
3.
Select Stereo or Mono.
To set the ringer sound:
1.
Select
2.
Select Ringer Sound.
3.
Select Normal or Headset Only.
Note:
Be sure to use only the stereo headset that comes with your phone.
Using other headsets could damage your phone.
Section 2B: Controlling Your Phone's Settings
> Settings > Others > Headset Mode.
> Settings > Others > Headset Mode.
> Settings > Others > Headset Mode.
:
79