Sending A Contact - Sanyo Power Vision SCP-8400 User Manual

Sending a Contact

You can send a Contacts entry to another Bluetooth device.
To send a contact:
1.
From standby mode, press Contacts (right softkey).
2.
Highlight a contact and press Options (right softkey) >
Send Contact.
3.
Select This or All and press
Bluetooth devices and display a list of available devices.)
4.
Select a device and press
5.
Make sure the other device is ready to receive data, and
then press Send (left softkey).
6.
If necessary, enter the PIN and press
Note:
Some vehicles with a built-in Bluetooth system allow you to transfer
your phone's contacts to the car. If your vehicle supports this feature, follow
the above steps to transfer your contacts to the vehicle's built-in Bluetooth
system.
222 Section 2M: Using Bluetooth
. (Your phone will search for
.
.