SOYO SY-P4X400 DRAGON Lite User Manual page 98

Mpga socket 478 processor supported via p4x400 agp/pci 400/533 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-P4X400 DRAGON Lite:
Table of Contents

Advertisement

2. Re-flash BIOS. Check on how to flash BIOS on the later part of
this book.
3. Change the CMOS battery, the battery might be drained.
4.
The BIOS chip might be failing.
Stability Issue
My system intermittently locks up, very unstable
1. Check the CPU Temp, it might be overheating. Change the CPU
FAN.
2.
Do not over clock your CPU
3.
Check the specification of the memory module, maybe the M/B do
not support it.
4.
Go to BIOS setup and load fail safe settings. Please check if the
system performance in the BIOS setup is set to Turbo/Maximum.
5.
Check website for latest BIOS update.
6.
Check website for FAQ's regarding instability issue.
7.
Change the memory module or CPU.
8.
The power supply might not have enough wattage to support all the
peripherals. If your system has other peripherals connected, like
CD-RW, extra HDD, etc. disconnect them.
9. Install VIA 4 in 1 driver.
My system intermittently locks up, during Windows installation.
1. Go to BIOS and load "load optimized default".
2. Check website for any BIOS update.
3. If still has the problem, remove all other add-on cards except CPU/
Memory/ Video card/Hard disk. See if you can finish Windows
installation. Then put peripherals in one by one to identify which
one cause the lockup.
My system will not boot-up when I set my CPU to 133MHz FSB, works
with 100MHz FSB
1. Make sure to put some thermal paste above the CPU.
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P4x400 series

Table of Contents