GE MultiSync 100 Instruction Manual page 51

CHAPTER 4: INTERFACES
MULTISYNC 100 GPS CLOCK – INSTRUCTION MANUAL
Clock Setting Controls Access to...
Maintenance Maintenance tab
GPS tab: Reset GPS button
Note: If Maintenance access is set to None, the Maintenance tab is removed
regardless of the GPS or Information settings.
Security User tab
Access Control tab
Network tab: SNMP sub-tab.
GPS GPS tab
Maintenance tab: Rest GPS button
Note: If GPS access is set to None, the GPS tab is removed along with the Reset GPS
button on the Maintenance tab.
Network Network tab: Basic sub-tab
NTP Network tab: NTP sub-tab
PTP Network tab: PTP sub-tab
3. On the Ethernet Ports tab, click the radio buttons to set user group access levels for
different ethernet settings.
4. Click the Update icon
changed configuration to the clock.
CONFIGURE ACCESS CONTROL SETTINGS
at the top of the GE Config window to save the
45