Table of Contents
Advertisement
CONFIGURE NETWORK SETTINGS
Change IEEE 1588 / C37.238 PTP settings
36
4.
To switch from the Server to the Client (SNTP) view, click Advanced Options, and then
the Client (SNTP) radio button.
5.
Change settings as needed. When finished, click the Update icon
of the GE Config window to save the changed configuration to the clock.
1.
Click the Network tab in the GE Config window.
2.
Click the PTP tab.
3.
Check Enable, if not already checked.
4.
To switch between basic PTP views, click the Config and Status radio buttons.
CHAPTER 4: INTERFACES
MULTISYNC 100 GPS CLOCK – INSTRUCTION MANUAL
at the top
Advertisement
Table of Contents
