Using The Flash - HP 720 Series User Manual

Using the flash

When the camera is turned on, the flash is automatically set to
Auto Flash. If you change the flash setting, the camera will
remain in that setting until you change it again or turn off the
camera.
To set the flash, press the
setting appears on the Status LCD. The following table
describes the different flash settings:
Icon Setting
Auto Flash
AUTO
Red-eye
Reduction
AUTO
Flash On
Flash Off
26
Flash button until the desired
Description
The camera measures light and uses the
flash if necessary.
The camera measures light and uses the
flash with red-eye reduction if
necessary.
The camera always flashes. If the light
is behind your subject, you can use the
flash to increase the light on the front of
your subject. This is also called "fill-
flash."
The camera will not flash. Use this
setting when you do not want a flash
(such as with distant objects). This may
result in long exposures that will require
using a tripod.
hp photosmart 720 user's manual