Installing The Software On A Macintosh Computer; Connecting The Camera To A Macintosh Computer - HP 318 User Manual

4 Press the
5 Turn the
the dial.
6 Turn the
dial.
Installing the software on a Macintosh
computer
You can unload images to your computer either manually or
automatically. To use the camera's automatic unload feature,
install the ArcSoft PhotoImpression with Automatic Image Unload
software from the camera CD.
1 Insert the HP photosmart 318 CD into your computer's CD-
ROM drive.
2 Click the installer icon, and then follow the instructions on the
screen to install the software.
To install the bonus software
Certain versions of the camera are shipped with bonus software.
1 Insert the HP photosmart 318 CD into your computer's CD-
ROM drive.
2 Double-click the Bonus folder icon.
3 Double-click the installer icon for Panorama Maker or
PhotoFantasy.
4 Follow the instructions on the screen to install the software.
Connecting the camera to a Macintosh
computer
Before connecting the camera to your computer, make sure you
have changed the PC Connect Mode setting, as described
earlier.
36
dial to open the Setup menu.
dial to scroll to PC Connect Mode, and then press
dial to scroll to Disk Drive, and then press the
HP photosmart 318 User Guide