Installing The Software On A Windows Computer; Connecting The Camera To A Windows Computer - HP 715 User Manual

Installing the software on a Windows
computer
1 Insert the HP photosmart 715 CD-ROM into the computer's
CD-ROM drive. The installation window automatically appears.
Note
2 Click Next, and then follow the instructions on the screen to
install the software.
Certain versions of the camera are shipped with bonus software.
Keep the HP photosmart 715 CD-ROM in the computer's
CD-ROM drive and continue to the next section to install the
bonus software.
To install the bonus software
1 Click Start, click Run, and in the Open box, type
X :\Bonus\setup.exe (where X is the drive letter assigned to
your CD-ROM drive).
2 Click OK, and then follow the instructions on the screen to
install the bonus software.
Connecting the camera to a Windows
computer
Before connecting the camera to your computer, make sure you
have installed the software.
Note
Sharing and printing images
If the installation window does not appear, click
Start, and then click Run. Type X :\Setup.exe,
where X is the letter of your CD-ROM drive.
The camera uses a USB connection, so you do not
need to turn the computer off when connecting or
disconnecting the camera.
31