Table of Contents
Advertisement
The status LCD displays
connected to a computer.
After a few seconds, the software starts. Follow the instructions
on your computer screen to complete the unload process.
Note
You can set up the HP Automatic Image Unload software so that
certain tasks occur automatically after the images are unloaded
from the camera. You can:
automatically view your images.
automatically print your images.
automatically lay out a photo album page.
To set up the automatic tasks, in the HP Automatic Image Unload
Software window, click Task Options. For more information,
double-click the HP Quick Reference—Photo Imaging icon that
is installed on your desktop with the software.
Using the camera with a Windows NT 4.0
computer
Windows NT 4.0 does not support the USB interface, so you
cannot connect your camera directly to your computer. You can
save your images to a CF memory card (purchased separately)
and then transfer them from the card to the computer through
either a memory card slot in an HP printer equipped with one or
through a memory card reader.
To use an HP printer that has a memory card slot
Follow the instructions in your printer documentation to transfer
images from the memory card to your Windows NT 4.0 computer
through the printer's memory card slot.
Sharing and printing images
PC
To pause the automatic unload, click anywhere in
the HP Automatic Image Unload Software window.
If you have no new images in your camera when
you connect it to the computer, the automatic unload
does not take place.
to indicate the camera is
33
Advertisement
Table of Contents
