Copy Access Controllers; Installing A Copy Controller; Using A Copy Controller - HP 210/210LX User Manual

Installing a Copy Controller

Installing a Copy Controller Installing a Copy Controller
Installing a Copy Controller Installing a Copy Controller
CAUTION CAUTION
CAUTION CAUTION CAUTION

Using a Copy Controller

Using a Copy Controller Using a Copy Controller Using a Copy Controller Using a Copy Controller

5-2 Copy Access Controllers

5-2 5-2
5-2 5-2
1 1 1 1 1 Turn off the HP Color Copier 210.
2 2 2 2 2 Plug the copy controller into the port in the back of the HP Color
Copier 210.
3 3 3 3 3 Turn on the copy controller and then the HP Color Copier 210.
4 4 4 4 4 Press the menu button until Copy Controller is displayed on the front panel
display.
After you have activated a copy controller, you will be able to make copies only
if the copy controller is attached.
5 5 5 5 5 To activate the copy controller, press Select/Resume.
6 6 6 6 6 To confirm, press Select/Resume again. Pressing any other key will cancel
activating the copy controller.
After a copy controller has been activated, the only way to make copies is
through the copy controller. If a person tries to make a copy without using
the copy controller, the following message will appear:
Cannot copy. Access through copy controller.
If the copy controller is turned off, disconnected, or otherwise disabled, the
following message will appear:
Cannot copy. Copy controller disconnected.