Function Menu Options; Function - Haier HL19SL2 Owner's Manual

3.Playback speed.1x,2x,4x,8x,16x,32x.
4.Playback position. The playback position is always at
the center of the time bar.
5.Time scale, which shows the scales of every half hour.
The text would move smoothly as the time go by. And
the time scale text could be cut-off if the text is on the
boundary.
Note
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: No limited.

Function Menu Options

A
Press
following menu appears on the screen.
Downloaded from www.Manualslib.com
Play Fast forward
Pause Fast reverse
Time Shift function is only available in DTV
mode.
The maximum recording duration is determined
bduration time can be calculated by the formula.
The timeshift record only supports FAT32 file-
system.
The timeshift record supports more than 4GB
recording. That is, the timeshift data is stored in
multi-file to resolve the FAT32 4 GB limitations.
The recording buffer is a ring buffer. For ring buffer,
if the maximum recording duration is reached,
the oldest program would be discarded and keep
recording the latest program.
When changing channel or changing input source,
the timeshift would stop automatically.
Timeshift record will store the fact of no signal.
Timeshift record will store the video, audio and
data service. But because of the limited number of
PID filter in hardware, we only support:
In recording, the data is not guaranteed to be
stored in the disk. If the timeshift playback plays
a corrupted data block, it would show "Data lost"
message to indicate that the current data is not
stored correctly
MENU button and CH+/- button until the
Language English
Video
OSD Timeout Short
OSD Transparency Middle
Audio
DPMS
Channel
Blue Screen
DCR
Time Setup

Function

Closed Caption
Lock
Default
CH+/-
Function Select
VOL+/-
manuals search engine
B
Press
CH+/- button to go up and down to select the
desired option.
C
Press
button increase and decrease the level to adjust the
selected option to your preference.
D
Repeat step 2 and step 3 until desired quality has
been achieved.
Function
Language :Press VOL+/- button to select language of
the OSD.
OSD Timeout : Press VOL+/- button to select Middle
/Short and Long to change thetime of the OSD
display.
OSD Transparency : Press VOL+/- button to select
among Low/High and Middle to change the
transparency of the OSD. To select Low, the OSD is
opacity.
DPMS : PC Power Management. To set On, the set
will be in standby mode automatically if no signal
in 2 minutes; if signal input , the set will be on again
automatically.
Blue Screen: Press VOL+/- button to select On, the
screen will be in blue after 3 seconds if there is no
signal.
DCR: Press VOL+/- button to select On or Off.
Time Setup: Press VOL+/ ENTER button to enter the
submenu.
Time Zone: Press VOL+/- button to select the
appropriate time zone.
On
On
Time Setup
On
Date/Time:
the submenu.
EXIT Back
VOL+/ ENTER button to enter the menu and
VOL+/ ENTER button to confirm and VOL+/-
Time Zone
Video
Date/Time
Sleep Timer Off
Audio
Channel
Function
Lock
CH+/-
Select EXIT
VOL+/-
Press VOL+/ ENTER button to enter
Haier LED HDTV
Operation
Back
EN-14