Table of Contents
Advertisement
When the maximum recording duration is reached,
R
the oldest program would be deleted and the
latest program is recorded.
When changing channel or changing input source,
R
the timeshift would stop automatically.
Time shift record will store the fact of no signal.
R
Time shift will store the video, audio and data
R
service. we only support:
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: No limited.
In recording, the data is not guaranteed to be
R
stored in the disk. If the timeshift playback plays
a corrupted data block, it would show "Data lost"
message to indicate that the current data is not
stored correctly.
Please connect the TV antenna or Cable TV coaxial
R
cable to the Antenna input on the TV. Then please
complete the channel scan. The Time Shift feature
is available when using your ATSC tuner and QAM
cable tuner.
Function Menu Options
A
Press
MENU button and CH+/- button until the
following menu appears on the screen.
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
DPMS
Blue Screen
Function
DCR
Time Setup
Lock
Closed Caption
Default
Function
B
VOL+/ ENTER button to enter the menu and
Press
CH+/- button to go up and down to select the
desired option.
C
VOL+/ ENTER button to confirm and VOL+/-
Press
button increase and decrease the level to adjust the
selected option to your preference.
D
Repeat step 2 and step 3 until desired quality has
been achieved.
Function
Language
:Press VOL+/- button to select language of
Y
the OSD.
OSD Timeout
: Press VOL+/- button to select Middle
Y
English
Short
Middle
Normal
On
On
On
CH+/-
Select
EXIT
Back
VOL+/-
/Short and Long to change thetime of the OSD
display.
OSD Transparency
: Press VOL+/- button to select
Y
among Low/High and Middle to change the
transparency of the OSD. To select Low, the OSD is
opacity.
Screen Mode
: Press VOL+/- button to select among
Y
Normal/Wide/Zoom and Cinema to change the
display mode(display mode may differ from different
inputs).
DPMS
: PC Power Management. When set On, the set
Y
will be put in standby mode automatically if there is
no signal received for 2 minutes.
Blue Screen:
Press VOL+/- button to select On, the
Y
screen will be in blue after 3 seconds if there is no
signal.
DCR:
Dynamic Contrast Ratio.
Y
select On or Off.
Time Setup:
Press VOL+/ ENTER button to enter the
Y
submenu.
Time Zone:
Press VOL+/- button to select the
•
appropriate time zone.
Time Zone
Video
Date/Time
Sleep Timer
Audio
Channel
Function
Lock
Time Setup
•
Date/Time:
Press VOL+/ ENTER button to enter
the submenu.
Auto
Video
Date
Audio
Time
Channel
Timer
On Time
Function
Off Time
Lock
Date/Time
Auto: Press VOL+/- button to select On or Off . When
Auto mode on , the time can not be adjusted. Select
Operation
Press VOL+/- button to
Off
CH+/-
Select
EXIT
Back
VOL+/-
On
2009/01/01
11:54 AM
Off
11:54 AM
12:00 AM
CH+/-
Select
EXIT
Back
VOL+/-
Haier LCD HDTV
EN-14
Advertisement
Table of Contents
