Function Menu Options - Haier HL19T User Manual

Menu Operations

Function Menu Options

1. Press MENU button and CH+/CH- until the following menu appears on the
screen.
2. Press VOL+/OK button to enter the Function menu and CH+/CH- to go up and
down to select the desired option .
3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press VOL+/VOL- button to select language of the OSD.
OSD Timeout: Press VOL+/VOL- to select Middle, Short and Long to change the
time of the OSD display.
OSD Transparency: Press VOL+/VOL- to select among Low, High and Middle
to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press VOL+/VOL- to select among Full Screen, Normal, Wide,
Zoom and Cinema to change the display mode. ( display mode may differ from
different inputs)
Blue Screen: Press VOL+/VOL- to select On , the screen will be in blue after
3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.
Time Setup: Press VOL+/OK to enter the submenu.
Time Zone: Press VOL+/VOL- to select the appropriate time zone.
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
Blue Screen
DPMS
Function
Time Setup
Lock Closed Caption
Default
CH+/-
Function
VOL+/-
English
Short
Middle
Full screen
On
On
Select EXIT Back