Installing Expansion Cards - DFI G486VPB User Manual

PCI/ISA System Board

Installing Expansion Cards

The G486VPB is equipped with three dedicated PCI and
three dedicated ISA slots. One PCI slot and one ISA slot
is shared. You can only install a card in one or the other
of the shared slots at a time, you cannot install devices
in both slots. Due to the size of the CPU and heatsink/
fan component, card size is limited. The location of the
expansion slots are shown below.
Note:
The system can support three bus-master PCI cards.
Place two bus-master cards in slots PCI3 and PCI4. A
third bus-master card can be placed in either slot PCI1
or PCI2. The remaining slot (PCI1 or PCI2) can sup-
port a slave card only.
56
See note