Motorola SGSW-2620 User Manual page 12

Problem Resolution...
I paired my • Your device has been
device with manually disconnected
the car kit, from the car kit. Initiate a
but now the Bluetooth connection from
car kit won't the device as described in
connect "automatic connection" on
with it. page 13.
• Repeat the initial pairing
process (see "initial
pairing" on page 12).
• The Bluetooth feature in
your device has been
turned off. Follow the
directions in your device's
user manual to turn it
back on.
Problem Resolution...
I cannot • You may not have a "voice
voice dial a tag" set up for the number
call. you want to dial in your
phone. Follow your device's
user manual to set up voice
dialing.
• Background noise may be
interfering with your voice.
Relocate the microphone to
a quieter place. Move the
microphone closer to the
driver. Passengers in the
car should be quiet while
voice dialing. Minimize
wind noise by rolling the
windows up.
Appendix A — Troubleshooting
22
Problem Resolution...
Call waiting Some networks do not support
does not multi-party calling features.
work.
Contact your service provider for
Three-way more information.
calling does
not work.
If I interrupt Some phones require you to
the Bluetooth reconnect the phone to the car kit
link by from the phone's menu after the
walking away Bluetooth link has been interrupted.
from the car,
Alternatively, you can press and
it does not
hold the green (SEND) button for
automatically
2-6 seconds to establish a voice dial
reestablish
session in order to force a phone
itself when I
connect. Once connected, press
come back
the red (END) button to end the
within range.
voice dialing session.
Appendix A — Troubleshooting
Problem Resolution...
I cannot • Most phones prompt with a
voice dial a beep to indicate it is now
call (con't). time to speak. Wait until
the beep has ended before
speaking. Do not over
speak the beep.
21