Long Sensing Range Retrorefl Ective Type Sensor (Nx5-Rm7□) - Panasonic NX-5 series User Manual

3-3 Long sensing range retrorefl ective type sensor
(NX5-RM7□)
● Please take care of the following points when detecting materials having a gloss
with retrorefl ective type sensor (NX5-RM7□).
1. Make L, shown in the diagram, suffi ciently long. (Note)
2. Install at an angle of 10 to 30 degrees to the sensing object.
Note: In case the distance between the sensor and the sensing object is short, the re-
fl ected light from the sensing object may be detected.
● Retroreflective type with polarizing filter (NX5-PRVM5□ )does not need the above
adjustment.
Glossy surface
10 to 30°
Sensor L
Refl ector
Sensing
object
The distance L should be as long possible.
9