Panasonic NX-5 series User Manual page 20

Notes: 1) The model No. with suffi x "P" shown on the label affi xed to the thru-beam type sensor is the emitter, "D"
shown on the label is the receiver.
(e.g.) Thru-beam type sensor emitter: NX5-M10RP, Thru-beam type sensor receiver: NX5-M10RAD
2) The retrorefl ective type sensor with polarizing fi lters may not stably detect specular or glossy objects
through transparent fi lm since light is polarized by the transparent fi lm.
3) The sensing range and sensing object for the retrorefl ective type sensor is specifi ed for the RF-230 re-
fl ector. Further, the sensing range is the possible setting range for the refl ector. The sensor can detect
an object less than 0.1m away.
4) The sensing range and hysteresis of the diffuse refl ective type sensor and narrow-view refl ective type
sensor are specifi ed for white non-glossy paper (200 × 200mm) as the object.
5) If slit masks (optional) are fi tted, an object as small as 3 × 6mm can be detected.
6) Make sure to confi rm detection with an actual sensor before use.
7) By mounting optional interference prevention fi lter PF-NX5-□, two sensors can be mounted closely.
8) In case the sensor is to be used at an ambient temperature of -15
20
Refl ector cannot be
placed in this range.
0.1m Setting range of
Sensor
Refl ector
Actual sensing
range of the sensor
the refl ector
Refl ector
5m NX5-RM7□
is 7m
or less, please contact our offi ce.
°C