Table of Contents
Advertisement
INSTALLATION
FITTING THE HANDLES
A (top)
B (right)
1. Remove the handles from the packaging
2. Fit the refrigerator door first (A) by aligning the handle
with the mounting locations on the door. (as shown
below) ensuring that the handle end marked "TOP" is
aligned with the top mounting location on the door.
3. Pull the handle down until you hear a "click"
4. Repeat this with the other refrigerator handle.
A (refrigerator handles)
5. Next, fit the freezer handle (B).
B (freezer handle)
6. Align the freezer handle with the mounting location on
the freezer door, ensuring that the end marked "Right" is
aligned with the mounting location on the right side of
the door
7. Pull the handle to the left until you hear a "click"
8. Clean your refrigerator thoroughly following the
instructions on page 15 and wipe off any dust that has
accumulated during shipping.
9. Plug your refrigerator straight into its own power point
and never use a double adapter.
10. Before you put any food in your refrigerator, it is
recommended you leave it on for 2 or 3 hours to check
it is running properly and the appropriate temperature
is reached.
Congratulations! You have successfully installed your new
refrigerator.
INITIAL START-Up
INITIAL START-Up
Refrigerators work by transferring heat from the food inside
to the outside air. This operation makes the back and sides
of the refrigerator (particularly at start-up) feel warm – which
is normal.
A cooling coil is located behind the rear wall of the freezer
section. This coil cools and removes moisture from the air
inside.
Avoid placing food against the air vents in the refrigerator,
as it affects the efficient circulation. If the door is opened
frequently, a light frosting will occasionally occur on the
freezer's interior. This is normal and will clear after a few
days.If the freezer door is accidentally kept open, a heavy
frost will coat the inside walls and should be removed.
Your new refrigerator uses a high-speed compressor,
along with other energy-efficient components, which may
make unusual sounds. These sounds simply indicate your
refrigerator is working how it should. They include:
• Compressor running noises;
• Air movement noise from the small fan motor;
• A gurgling sound, similar to water boiling;
• A popping noise, heard during automatic defrosting;
and
• A clicking noise, prior to compressor start-up.
9
Advertisement
Table of Contents
