Command And Response Table For Sis Commands; Fox Extender Program; Installing The Software - Extron electronics FOX DA8 User Manual

Command and Response Table for SIS Commands

Command
Channel Mute
NOTE:
The channel mute commands mute the data on the output only. The output continues to emit light.
Mute output
Unmute output
Show video mute status
Mute all outputs
Unmute all outputs
Show mute status of all outputs
Information Requests
Information request
Show firmware version
Example:
Request part number
Show input connections status
Show temperature
Show transceiver module status 0*1I

FOX Extender Program

The Extron FOX Extender program, which communicates with the FOX DA8 via the rear
panel RS-232 port or front panel Config port of the unit, provides an easy way to operate
the DA8.
The program is compatible with Windows 2000, Windows XP, or later. Updates to this
program can be downloaded from the Extron website (www.extron.com).

Installing the Software

The program is contained on the Extron Software Products DVD. Install the software as
follows:
1.
2.
ASCII Command Response
(host to unit) (unit to host)
X! X!
*1B Vmt
X! X!
*0B Vmt
X! X@]
B
]
1*B
Vmt1
]
0*B
Vmt0
E } X@ X@
1
VM
I
V01X08•A00X00
X#]
Q
]
Q
1.23
N
60-927-nn
X$]
0LS
20S X%]
X^ X^
1
Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run
Launch.exe
The Extron software DVD window appears (see
Additional Description
]
*1
Blank data on optical output
]
*0
Output data on optical output
Output
(0 = unmuted, 1 = muted).
Blank data on all optical outputs.
Output data on all optical outputs.
X@ X@ X@ ]
2 4 8 Show output 1 through output 8 mute
3
...
status.
]
V01X08 shows the number of available
inputs (1) and outputs (8) for this product.
A00X00 has no meaning for this product.
The factory-installed FOX DA8 controller
firmware version is 1.23 (sample value only).
]
nn indicates the transmission mode.
01 = multimode, 02 = singlemode.
0000000 = no light on the input,
10000000 = light received.
X%
= degrees Fahrenheit.
X^ X^ X^ ]
2 3 4 8 Show all installed transceiver modules.
...
0 = none, 1 = multimode, 2 = singlemode.
from the DVD.
figure 7).
Extron FOX DA8 • Remote Control
X!
.
X!
.
X! X@
data output mute status is
10