Advertisement
S T O R A G E
1. Disassemble and clean fan
before storing.
2. Keep the original packaging for
the purpose of storing the fan.
3. ALWAYS store the fan in a dry
place.
4. NEVER store the fan while it is
still plugged in.
5. NEVER wrap the cord tightly
around the fan.
6. DO NOT put any stress on the
cord where it enters the fan, as it
could cause the cord to break.
41631-01 05/06/2003
TROUBLESHOOTING
PROBLEM
• Fan will not oscillate.
SOLUTION
• Push down on knob on top of
motor housing to activate oscilla-
tion.
PROBLEM
• Can not adjust the
angle of the fan.
SOLUTION
• Loosen the screw on the side of
the fan neck. Adjust to the desired
angle and tighten the screw.
If you have tried these troubleshoot-
ing solutions and still have trouble,
call 1-888-830-1326 (For CAN: 1-
866-268-1936) or visit our Web site
at http://www.hunterfan.com.
7
Advertisement
