Advertisement
M A I N T E N A N C E
This fan is permanently lubricated
and will not require additional
lubrication (oil) for the life of the fan.
This fan requires little maintenance
and contains no user serviceable
parts. DO NOT try to fix it yourself.
Contact qualified service personnel if
servicing is needed.
TO CLEAN:
1. Before cleaning, turn fan off and
unplug from electrical outlet.
Wipe off excess dust with a lint-
free cloth.
2. To ensure adequate air circula-
tion to the motor, keep vents
located at the rear of the motor
housing free from dust accumu-
lation. A vacuum cleaner hose
can be used to clean these vents.
3. DO NOT immerse the fan in
water or any other liquid.
CLEANING GRILL AND BLADE:
1. Turn the fan off and unplug from
the electrical outlet.
2. Disassemble grills by carefully
removing the screw on the
bottom of the grill and by
squeezing the ring to remove the
hook from the hole. See Figure
4.
3. Disassemble blades by carefully
removing the blade screw behind
the blades. The blades should
slide off.
6
4. Grills and blades may be cleaned
with mild soap and water.
5. Use a soft, slightly damp cloth to
wipe the remaining fan parts.
6. DO NOT allow water or any
other liquid to get into the
motor housing or base.
7. Reassemble the fan after blades
and grills have dried completely.
First, replace the blades. When
replacing the blade screw, you
should feel some resistance as
the screw engages the bar. Next,
align the grills, replace the ring,
place the hook in the hole and
replace the screw.
8. DO NOT plug fan into an
electrical outlet until it has been
fully reassembled.
Front
Back
Grill
Grill
Blade
Screw
Blade
Ring
Power/Speed
Control Switch
FIGURE 4
Handle
Oscillation
Knob
Motor
Housing
Up/Down
Adjustment
Screw
Base
41631-01 05/06/2003
Advertisement
