Input Image Setup - Vdwall LVP603S User Manual

LVP603S User's Manual
Item 17~19: " Text_Thd_R/G/B"
The three options are used to set R, G, B values respectively as a
certain value within 0~252.
The following figure shows an example of caption adding function.
The caption document in this sample is made using Powerpoint. Its
parameters are set as below:
15 Caption knock-out mode
16 Caption threshold RGB
17 Caption threshold R
18 Caption threshold G
19 Caption threshold B
Background

7. Input image setup

LVP603S supports multiple machines to work together in parallel,
in such mode, a number of small LED screen make up a large screen.
If the output format of LVP603S is: 1920×1080, when 2 sets of
LVP603S are connected in parallel, they can connect any LED screen
of no higher than 3840×1080 pixels.
When a number of LVP603S are connected in parallel in
applications, user should set input image parameters of each
LVP603S. For details of parameters see the table below:
Items No.
21
22
23
24
Caution: When work together in parallel, each set of LVP603S
should retain the same data in set-up of brightness, bias and Definition
---------------------------------------------------------------------------------------------------
Text
Item Name
Input_width
Input_height
Hori_In_Str
Vert_In_Str
LED VIDEO PROCESSOR
<Threshold
232
Default
Default
Default
Text Overlay
17