Pip/Pop Output Image Setup - Vdwall LVP603S User Manual

LVP603S User's Manual
brightness, and 64 represents the highest brightness.
Press "←" or "→" to increase or decrease the values of brightness.
Press "Enter" to save the settings.
To ensure full gray level of output image, normally the output
brightness is set as 64!
Item 8: "Color"
For V1, V2, DP and HDMI video input source, LVP603S can set
color saturation for them ranging from 22 to 38. The lower this value is,
the weaker the color looks; the higher this value is, the stronger the
color looks. Press "←" or "→" to increase or decrease the values of
color saturation. Press "Enter" to save the settings.
Normally the value of color saturation is set as 30!
Item 20: "Definition"
LVP603S provides "sharp" or "normal" as options of definition. In
sharp mode, the picture edge looks clearly, and image has higher
definition; while in "normal" mode, the picture looks milder. Normally
the value of Definition saturation is set as "normal"!

5. PIP/POP Output Image Setup

Items 9~12: "PIP image output setup"
LVP603S PIP image window is located in LED screen. As in PIP
mode the PIP image is to be zoomed-in/out after being added to
background, it means that 4 values listed in items 9~12 in the table
below don't represent their pixels in LED, but represent the width and
height value of output resolution "Out_Format" in the 6
setting menu. For details see figure below (provided "Out_Format"
adopts 1920×1080 mode).
Note: the minimum values of PIP_H_Width and PIP_V_Heigh are
both 128.
---------------------------------------------------------------------------------------------------
9
PIP_ H_Start
10
PIP_H_Width
11
PIP_V_Start
12
PIP_V_Heigh
PIP horizontal start
PIP width
PIP vertical start
PIP height
LED VIDEO PROCESSOR
th
option of
14