User Guide Contents Introduction....................1 USB Ranger Product Contents..............1 About the USB Ranger ................2 Before You Begin ..................5 Installing the LEX unit................5 Installing the REX unit ................5 Connecting the LEX unit to the REX unit ..........5 Checking the Installation................
User Guide Introduction This manual is intended to assist IT professionals install the USB Ranger 422. The instructions in this guide assume a general knowledge of computer installation procedures, familiarity with cabling requirements, and some understanding of USB devices. : Notes give additional information that could make installation NOTE easier.
USB peripheral devices and allows users to enjoy the benefits of USB technology beyond the desktop. With the USB Ranger 422, USB devices can be located up to 500 meters from the host computer.
User Guide The REX unit The REX unit connects to a USB device using a conventional USB cable. The REX unit allows you to connect up to four USB devices. It is powered by an external AC adapter. Front View Rear View 1 Power LED 5 Link LED...
Compatibility The USB Ranger complies with USB 1.1 specifications governing the design of full speed USB devices. However, Icron Technologies Corporation does not guarantee that all full speed USB devices are compatible with the USB Ranger.
User Guide Before You Begin Before you can install the USB Ranger, you need to prepare your site. 1. Determine where the host computer is to be located and set up the computer. 2. Determine where you want to locate the USB device(s). 3.
USB Ranger 422 With Premise Cabling 1. Plug one end of a fiber-optic patch cord (not included) into the Link port on the LEX unit. 2. Plug the other end of the patch cord into the fiber-optic information outlet near the host computer.
User Guide Troubleshooting The following table provides troubleshooting help. The topics are arranged in the order in which they should be executed in most situations. If you are unable to resolve the problem after following these instructions, please contact technical support for further assistance (see page 11). Symptoms/Cause Remedy All LEDs on LEX unit are...
Page 12
USB Ranger 422 Symptoms/Cause Remedy A device is connected to the 1. Disconnect the USB Ranger from the REX unit and the computer. corresponding Device LED 2. Connect the USB device directly to the is off USB port on the computer.
User Guide Specifications Range (over 62.5/125 500 meters (1650 ft) fiber-optic cable) USB device support Full speed devices (12 Mb/s) Low speed devices (1.5 Mb/s) USB hub support Any single chain can include four USB hubs and one USB Ranger, in any order. Power available to USB 4 x 500 mA device at the REX unit...
Hardware Remedies Icron Technologies Corporation’s entire liability and the Licensee’s exclusive remedy for any breach of warranty, shall be, at Icron Technologies Corporation’s option, either (a) return of the price paid or (b) repair or replacement of hardware, which will be warranted for the remainder of the original warranty period or 30 days, whichever is longer.
The repaired or replaced item will be shipped to you, at Icron Technologies Corporation’s expense, not later than thirty days after Icron Technologies Corporation receives the defective product.
Need help?
Do you have a question about the 422 and is the answer not in the manual?
Questions and answers