Honda 2000 RL Owner's Manual page 275

Main Menu
Table of Contents
Changing a Flat Tire
JACK
6. Turn the jack's end bracket
counterclockwise to loosen it, then
remove the jack by lifting it
straight up.
Taking Care of the Unexpected
WHEEL WRENCH
7. Loosen the five wheel nuts 1/2
turn with the wheel wrench.
8. Locate the jacking point nearest
the tire you need to change. It is
pointed to by a mark molded
into the underside of the body.
Place the jack under the jacking
point. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
JACKING
POINT