Driving Position Memory System - Honda 2000 RL Owner's Manual

Main Menu Table of Contents

Driving Position Memory System

Your Acura has a memory feature
for the steering wheel, driver's seat
and outside mirror positions.
Two seat, steering wheel, and
outside mirror positions, for
different drivers or driving
conditions, can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button.
Instruments and Controls
Storing a Driving Position in Memory
Store a driving position as explained
in this section only when the car is
parked.
1. Turn the ignition switch ON (II).
You cannot add a new driving
position in the memory unless the
ignition switch is ON (II). You can
recall a memorized position with
the ignition switch in any position.
2. Adjust the seat to a comfortable
position (see page 93). Adjust
the steering wheel to a
comfortable position (see page
71).
Adjust the outside mirrors for best
visibility (see page 98).
MEMO BUTTON
3. Press and release the MEMO
button on the control panel. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator light in the
memory button will come on. The
current positions of the driver's
seat, steering wheel, and outside
mirrors are now stored.