Creating The File Systems - HP StorageWorks XP12000 Configuration Manual

Example

Creating the file systems

Installation
# lvdisplay /dev/vg06/lvol1
- - - Logical volume - - -
LV Name
VG Name
LV Permission
LV Status
Mirror copies
Consistency Recovery MWC
Schedule
LV Size (Mbytes)
Current LE
Allocated PE
Stripes
Stripe Size (Kbytes) 0
Bad block
Allocation
3. Repeat steps 1 and 2 for each logical volume to be created.
You can create only one logical volume at a time. However, you can
verify multiple logical volumes at a time.
Create the file system for each new logical volume on the disk array. The
default file system types are:
• HP-UX OS version 10.20 = hfs or vxfs, depending on entry in the
/etc/defaults/fs file
• HP-UX OS version 11.0 = vxfs
• HP-UX OS version 11.i = vxfs
To create file systems:
1. Use the newfs command to create the file system using the logical
volume as the argument.
/dev/vg06/lvol1
/dev/vg06
read/write
available/syncd
0
parallel
2344
586
586
0
on
strict
47