Connect The Disk Array; Defining The Paths - HP StorageWorks XP12000 Configuration Manual

Connect the disk array

Defining the paths

Installation
The HP service representative connects the disk array to the host by:
1. Verifying operational status of the disk array channel adapters, LDEVs,
and paths.
2. Connecting the Fibre Channel cables between the disk array and the
fabric switch or host.
3. Verifying the ready status of the disk array and peripherals.
Use Remote Web Console (shown), Command View, or Command View
XP AE to define paths (LUNs) between hosts and volumes in the disk
array.
This process is also called "LUN mapping." In Remote Web Console and
Command View, LUN mapping includes:
• Configuring ports
• Setting LUN security
• Creating host groups
• Assigning host bus adapter WWNs to host groups
• Mapping volumes to host groups (by assigning LUNs)
29