Creating The Mount Directories - HP StorageWorks XP12000 Configuration Manual

Creating the mount directories

Example
50
--- Physical volumes ---
PV Name
VG Name
PV Status
:
Stale PE
IO Timeout (Seconds)
4. Repeat the above steps for each new disk that is connected to the system.
Create a mount directory for each logical volume. Choose a unique name
for each mount directory that identifies the logical volume.
The following example shows the root directory as the location for the
mount directories.
To create a mount directory for each logical volume:
1. Use mkdir with the new mount directory name as the argument to create
the mount directory.
# mkdir /AHPMD-LU00
2. Use the ls –x command to verify the new mount directory.
# ls -x
AHPMD-LU00
floppy home
3. Repeat steps 1 and 2 for each logical volume on the disk array.
HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX
/dev/dsk/c0t6d0
/dev/vg06
available
0
30
bin dev
hstsboof
[New I/O timeout value]
device etc
kadb kernel
export
lib