Snmp Configuration; Raid Manager Command Devices - HP StorageWorks XP12000 Configuration Manual
Disk array xp operating system hp-ux
Hide thumbs
Also See for StorageWorks XP12000:
- User manual (200 pages) ,
- Owner's manual (98 pages) ,
- Site preparation manual (98 pages)
Table of Contents
Advertisement
SNMP configuration
RAID Manager command devices
Installation
The XP family of disk arrays supports standard Simple Network
Management Protocol (SNMP) for remotely managing the disk array. The
SNMP agent on the SVP performs error-reporting operations requested by
the SNMP manager. SNMP properties are usually set from the SVP but
they can also be set remotely using Remote Web Console XP, Command
View XP, or Command View XP Advanced Edition. Refer to the
applicable user's guide for procedures.
RAID Manager manages Business Copy (BC) or Continuous Access (CA)
operations from a host server. To use RAID Manager with BC or CA, you
use Remote Web Console, Command View, or Command View XP
Advanced Edition to designate at least one LDEV as a command device.
Refer to the applicable user's guide for information about how to designate
a command device.
19
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks XP12000 and is the answer not in the manual?