Creating The File Systems; To Create A File System For Each Device; To Create An Advanced File System - HP XP1024 System Configuration Manual

Creating the file systems
Create a file system for each new OPEN-x device. Optionally, you can create and
use an advanced file system (AdvFS) to overcome the size and speed limitations of
the file system. If you are not sure which file system is right for your setup, contact HP
customer support.
To create a file system for each device:
device_file_name
# newfs
To create an advanced file system:
You can create a new advanced file system domain, or you can add a new fileset to
an existing domain.
If you allocate multiple disk partitions to a domain, the advanced file system utilities must
be installed. Installing the utilities will enable you to allocate multiple disk partitions
to a domain using the addvol command.
Example
# addvol /dev/rzb8c domain1
1. Create a new domain.
# mkfdmn
The following example uses the block-type device file name (rzXYZ) to create an
advanced file system domain for device rz12c.
Example — Tru64 v4
Example — Tru64 v5
2.
Create a new fileset in the new or existing advanced file system domain.
# mkfset
Example — Creating fileset1 in domain1
device_file_name domain_name
# mkfdmn /dev/rz12c domain1.
# newfs /dev/rdisk/dsk10c OPEN-3
domain_name fileset_name
# mkfset domain1 fileset1
Disk Array XP operating system configuration guide: Tru64 UNIX
27