Centering The Running Belt - Vision Fitness T80 Owner's Manual

Treadmill
Hide thumbs Also See for T80:
Table of Contents

Advertisement

Available languages

Available languages

CENTERING THE RUNNING BELT

For more information and/or how-to videos, visit our Customer Support section on our
website. Contact information is located on the back page of the OWNER'S MANUAL.
CAUTION
Do not run belt faster than 3 mph/4 kmh while centering. Keep fingers, hair
and clothing away from belt at all times.
If the running belt is too far to the right side: Using the supplied Allen wrench
and with the treadmill running at 3 mph/4 kmh turn the LEFT adjustment bolt counter-
clockwise a ¼ turn and wait for the belt to adjust itself. Repeat if necessary, until the
belt remains centered during use.
If the running belt is too far to the left side: Using the supplied Allen wrench and
with the treadmill running at 3 mph/4 kmh turn the LEFT adjustment bolt clockwise a
¼ turn and wait for the belt to adjust itself. Repeat if necessary, until the belt remains
centered during use.
• If you find the belt is slipping because it is too loose, center it then tension as
needed.
• For easier adjustment bolt access, remove the end caps.
BELT IS TOO FAR TO THE RIGHT SIDE
BELT IS TOO FAR TO THE LEFT SIDE
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents